|
Home > VERDEX®
V-BONDTM is a highly engineered flooring adhesive specially formulated to install VERDEX® on wood or concrete sub-floors. In addition it may also be used for installation of most multi-ply engineered plank, plain-back parquet, ¾" solid shorts as well as acrylic impregnated multi-engineered plank flooring.* For all other wood applications please see our V-BONDTM PLUS option. Consisting of a polymeric resin with urethane, it is perfect for wet lay installations. In addition, it easily spread and an inhibitor of bacteria growth and mold. Before spreading V-BONDTM prepare the sub-floor by thoroughly cleaning and removing any dust, wax, paint, curing and hardening compounds and old adhesives as well as conducting any moisture tests which may be required by the finished floor manufacturer. Please refer to our Installation Guide and spread rate charts for further installation guidelines and information.
Click here for Frequently Asked Questions about V-BONDTM
Click here to download the Material Safety Data Sheet for V-BONDTM in the PDF format.
*Please refer to flooring manufacturer's installation guidelines for final approval and instructions.
FEATURES: |
|
- "Green" Adhesive
- Contributes to LEED credit EQ4.1
- Zero VOC's
- Solvent free
- No flash time required
- Easy clean up
- Spreads easily
- Low Odor
- Nonflammable and non-slumping
- Available in 4 Gallon Containers
|
 |
PLUS
V-BONDTM PLUS is a moisture cured urethane wood flooring adhesive specially formulated to install most exotic woods, solid plank flat milled up to ½" thick as well as acrylic impregnated wood to VERDEX®. * If using V-BONDTM PLUS to adhere the finished floor to VERDEX® you may also use it to install VERDEX® over your wood or concrete sub-floor. Compared to other urethane adhesives it is very easy to spread and clean up when wet, resulting in faster installations and increased productivity for installers and flooring contractors. Before spreading V-BONDTM PLUS, prepare the sub-floor by thoroughly cleaning and removing any dust, wax, paint, curing and hardening compounds and old adhesives as well as conducting any moisture tests which may be required by the finished floor manufacturer. Please refer to our Installation Guide and spread rate charts for further installation guidelines and information.
Click here for Frequently Asked Questions about V-BONDTM PLUS
Click here to download the Material Safety Data Sheet for V-BONDTM PLUS in the PDF format.
* Please refer to flooring manufacturer's product specification and installation guidelines for final approval and instructions.
| FEATURES: |
|
- "Green" Adhesive
- Contributes to LEED credit EQ4.1
- Contains no water
- Low Odor
- Nonflammable
- Remains elastomeric- responds to expansion/contraction of wood
- VOC compliant
|
 |
As part of the VERDEX® installation process V-SEALTM is the final step in maximizing your acoustical performance and sound attenuation from unit to unit. It is required that a 3/8" gap be left between the VERDEX® and the perimeter walls which is in turn filled by backer rod and final sealed by V-SEALTM. The purpose of this gap is to prevent flanking paths through which impact sound can transfer from the floor to the adjoining wall and down to the unit below. Please refer to our Installation Guide for further installation guidelines and information.
Click here to download the Material Safety Data Sheet for V-SEALTM in the PDF format.
| FEATURES: |
|
- Reduces Sound Transmission
- Permanently flexible
- Easy application and cleanup
- UL Classified
- VOC compliant
- Approximately 40 LF of coverage per tube
|
 |
|
|
